Tech Alarms

Standalone Packages

$25

Package description

Description

Additional Items Login To Add

Standalone Wireless Window/Door Alarm

$ 6

Product Description:

This product is easy to install, only need to paste the main and auxiliary parts on the cover and the chassis, or two windows, and align (leave about 5 mm gap). When someone unlawfully hits the cabinet or window (the main and auxiliary parts are separated), the alarm can send out a strong alarm sound to warn the intruder to leave. If you want to open the chassis, the door and window can be controlled by the switch.

The product is small and exquisite, and easy to install. The double-sided adhesive provided can be easily installed on doors or windows.

Specification:

Prevent burglars from opening doors or windows

Installation: Magnetically Controlled

Alarm sound:90 dB

Power supply:3x1.5V Battery (built-in)

Weight: Approx 35g

Host size:6x3x2cm/2.36x1.18x0.78in

Quantity:1pcs/5pcs/8pcs/10pcs(optional)

Application:

1.Doors,windows,families,shops,businesses, etc.

2.Internet cafes,computer chassis,anti-theft devices.

3.Applicable to anti-theft of Internet cafes,residential buildings, offices,shop counters,etc.Built-in 90 dB alarm output,using 3 x 1.5 V LR44 button battery (included).

4.It is suitable for burglar-proof of residential buildings,offices, shop counters,etc.

Installation:

1. Fix the main engine on the side of the door/window with double-sided sticker.

2. Stick another bar door magnet to the door frame along the main prompt line in a straight line.

3. When checking the settings, adjust the main switch to ON position.

4. Open the door and see if the alarm sounds.

Product Maintenance:

1.Sound continuously or silently:(because the alarm is turned upside down in express delivery) Take apart the product, there are two close reeds on the inside edge, they will sound separately, contact will stop alarming. Contact and separation are controlled by magnetic strips of accessories. You can make the distance between the two reeds nearer or farther.

2.Low voice:Turn on the switch always, run off the electricity and change the battery that will be ok.

Note:

Transition: 1cm=10mm=0.39inch

Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package Includes:

1/5/8/10pcs X Window Door Burglar Security Alarms

Standalone Motion sensor

$ 25

PRODUCT DESCRIPTION

Protect and deter intruders in both your home and office with this wireless remote control motion sensor alarm.

Ideal for use in Garages and Sheds.

Wireless, infrared detector, motion-activated

Include 2 direct infrared remote control,

Adjustable mounting unit

Easy to install

105 dB loudness

110 degree wide angle

The motion detector power by 4 AA batteries (not included)

The remote controller power by 3 AG13 batteries (included)

Note: 10 meters range for detection, after you arm the system.

When the alarm is triggered, it will sound for 40 seconds.

Specifications

Color: White

Item size: 121*85*50mm

Net weight:244g

Package Includes

1x Alarm Sensor With Siren Using just 4XAA batteries (Not Included)

2x Remote control with 3xLR44 button cell inside(Included)

1 x Wall holder

Instructions:

1.Replace the battery. Click the remote control, the machine issued a \'beep\' sound, while the green light. On behalf of the police is ready to enter the work state.

2.Remote infrared warning in the green light for 15 seconds standby delay, the alarm signal is not detected within 15 seconds, you must leave electronic dog detection area in this 15-second period.

3.15 seconds after the infrared warning if people enter the detection area, the red light flashes for 5 seconds. Within five seconds delay time, easy to master with a remote control to turn off the alarm. After 5 seconds, if there is no remote control signal is received, it will be issued for 30 seconds to issue shrill alarm sound, alarm volume is 105 DB. After the alarm sounds for 15 seconds, if there are personnel touch infrared remote control alarm indicator, it will alarm again, again and again.

Installation method:

1.The universal seat fixed to the ground at a distance of about 2 meters.

2.Open the battery cover, put 4 parts batteries.